Facade panel with concealed fixing |
|
Description |
|
The PERFIMUR facade panel with concealed fixing is manufactured through a continuous production process using the latest technology. The sandwich panel is formed by a double outlined metallic face wall, inside which a core of polyurethane foam acting as a thermal insulating is injected and expanded. This provides it with a great solidity thanks to the excellent polyurethane adherence to metallic parameters, due to the previous treatment that steel sheet received before the polyurethane injection and to the quality of raw materials. |
|
|
|
This panel is fixed by self-tapping screws hidden by the design of the joint to connect two panels. Besides, thanks to its thought-out design it can be maintained in a horizontal position avoiding rain water problems. The joint of this panel guarantees full water-resistance in both positions.
PERFIMUR also manufacturers this type of panel with the same outer finishes used for the micro rib and plain panels. This provides the panel with a great aesthetic appeal in facades that need personality or corporate image.
|
|
|
|
Steel |
|
PERFIMUR uses high-quality pre-lacquered steels.
Steel galvanised sheet Z225 by zinc immersion (Sendzimir process) S/N EN 1 0142 and DX51D quality of 0.5 mm thickness and pre-lacquering covering depending on needs (polyester, Plastisol, PVDF, etc.). It is also possible to manufacture other sheet thickness following a previous study.
|
|
Application |
|
Panels for vertical closing for facades in both vertical and horizontal position. |
|
Panel basic data |
|
Useful width |
1.000 mm |
Maximum length |
15.000 mm |
Polyurethane density |
40 Kg/m3 |
Nominal thickness |
35 - 40 - 50 - 60 - 80 mm |
|
|
|
|
Panels Weight |
|
|
Panel thickness (mm) |
35 |
40 |
50 |
60 |
80 |
Weight (Kg/m2) |
9,75 |
9,95 |
10,35 |
10,75 |
11,15 |
|
|
Thermal properties |
|
|
Thickness (mm) |
K (Kcal/m2 x h x C) |
K (W/m2 x C) |
35 |
0,46 |
0,53 |
40 |
0,42 |
0,49 |
50 |
0,34 |
0,40 |
60 |
0,28 |
0,33 |
80 |
0,21 |
0,25 |
|
|
Mechanical properties |
|
2 supports |
|
|
3 supports |
|
|
|
|
Perfiles Murcia S.A. reserves the right to change the characteristics when needed for its improvement. The data presented are not warranty conditions, due to the existent resistance in raw materials. |
|