Perfimur flashing cover |
|
Description |
|
PERFIMUR cover panels are manufactured through a continuous manufacturing process using the most modern technologies. The sandwich panel is formed by an outlined metallic face wall, inside which a core of polyurethane foam works as a thermal insulating. This provides it with a great solidity thanks to the excellent adherence of polyurethane to metallic parameters, due to the special treatment that steel sheet received. |
|
|
This panel fastening is made through screws hidden by the flashing, created for such purposes. Besides, this flashing guarantees full water-resistance because it avoids the entrance of water, even by capillarity. |
|
|
|
Steel |
|
PERFIMUR uses high-quality pre-lacquered steels. Steel galvanised sheet Z225 by zinc immersion (Sendzimir process) SIN EN 1 0142 and DX51D quality of 0.6 mm thickness and pre-lacquering covering depending on needs (polyester, Plastisol, PVDF, etc.). It is also possible to use other sheet thickness following a previous study. |
|
Application |
|
Minimum roof pitch of 5% for covers without flap. Minimum 7% for covers with flap. |
|
Panel basic data |
|
Useful width |
1.000 mm |
Maximum length |
15.000 mm |
Polyurethane density |
40 Kg/m3 |
Nominal thickness |
30 - 40 - 50 - 60 - 80 mm |
Maximum thickness in crests |
33 mm |
|
|
|
|
Panels weight |
|
|
Panel thickness (mm) |
30 |
40 |
50 |
60 |
80 |
Weight (Kg/m2) |
9,55 |
9,95 |
10,35 |
10,75 |
11,55 |
|
|
Thermal properties |
|
|
Thickness (mm) |
K (Kcal/m2 x h x C) |
K (W/m2 x C) |
30 |
0,52 |
0,60 |
40 |
0,41 |
0,48 |
50 |
0,34 |
0,40 |
60 |
0,29 |
0,34 |
80 |
0,23 |
0,27 |
|
|
Mechanical properties |
|
2 supports |
|
|
3 supports |
|
|
|
|
Perfiles Murcia S.A. reserves the right to change the characteristics when needed for its improvement. The data presented are not warranty conditions, due to the existent resistance in raw materials. |
|
|